Lovely tables however like others have said, they arrived with five of the eight leg tips broken off so only rate four stars with me. I can live with it as my patio surface is uneven and I do not need to worry about scratching the stone and gravel surface. May try to glue them too but not sure if that will hold, nothing to lose by trying though. Second issue was that the nut covers are hard and impossible in a couple of instances to place on the nuts holding the legs as the two leg bolts are too close together and not enough clearance between the two nuts to accommodate two of the nut covers. I was worried about the color but as you see in my pic the end tables with their splotches of copper look okay with the Christopher Knight chairs that are slightly more dark in color but as someone else said it actually is a nice contrast. Bit of advice for faster assembly which really was easy doing it solo. Use a 14mm open end wrench instead of the cheapo wrench that is included to put on the legs (each leg held on with two nuts after inserting a threaded shaft(s) into the prepped table top on the underside of each corner.)