A Good Value for $**, but not idiot proof.
This is a kit. It comes pre-cut, lightly sanded, stained and and pre-drilled. It is similar to the things I made in high school wood shop. the finish is ok but it is not fine furniture. The wood is soft pine with some knots. One knot was particularly rough and missing wood, however it was on an inside lower corner; it could be repaired. The kit saved me a lot of time but I could have built or bought something better if I wanted furniture quality. This would be perfect for a cabin, closet, workbench or gun safe. I am using it as a ready rack for temporarily holding guns for cleaning and packing for hunting and shooting trips. For these uses I recommend it however, this kit is definitely not like **** or idiot proof. You have to square it up yourself. Some of the cuts were not perfectly square and the bottom piece has a quarter inch gap which I placed at the back. Some of the pieces have slightly rounded edges. When assembling you must pay attention to the orientation of those parts. The lame instructions are a 5" X 7" drawing indicating screw locations. When assembling the first piece is pre-drilled and countersunk. The second piece is not pre-drilled. This is where you skillfully need to square it up. the wood is soft and the furnished drywall screws easily self tap. I strongly advise you assemble with a screwdriver and NOT a power tool! The kit could be used as a pattern and could be customized. It is intended for floor use but could be easily adapted for wall or table top mounting. A GOOD VALUE for about $**.