Overall happy with the design and look. Something to keep in mind when installing: I used a level to install the base to the wall, thinking that would level out the rod. Unfortunately, that wasn't the case. The rod droops almost a quarter of an inch after inserted into the base. I had to screw the base again into the wall, leaving 4 holes from the first attempt. The best way to install is to insert the rod into the base and let it droop naturally. Then use the level over the rod to get it balanced. Don't let it sit directly on the rod or it will add weight to the rod. The base will be turned almost an 1/8 of an inch. Once you have the rod leveled out, turn the base clockwise to allow for the weight of the drape. This will throw off your level but it will help compensate for the weight of the drape once you put it on there. My panel is lightweight so I turned it just a little, A heavier drape add more weight to the rod so turn the base more. Add the drape if you can then use the level. It will be tricky so a second person will help. Mark the holes and drill the base into place. The bottom screw cap can be tricky to turn into place as well. The threads don't line up very easily. It will take some patience.